
FIPS -201 Portable Industrial Fingerprint Scanner Module With 4G Wifi GPS Bluetooth
SPEEDATA KT45Q is a 4.5 inch screen handheld terminal with 4G WWLAN and multifuctional extension module. Support 1D/2D barcode reader,LF/HF/UHF RFID Scanner,Fingerprint collection,Thermal printer,PSAM,MSR function etc and accept customized combination.
Specification
KT45Q with options | |||||
Android OS | |||||
OS | Android 5.1 | ||||
Hardware | |||||
Core board | CPU | Quad-core 1.3Ghz ARM® Cortex-A53 (LPDDR2 and LPDDR3) | |||
WWLAN | FDD B1B3B7 TDD B38B39B40 WCDMA B1B2B5B8 EVDO BC0 GSM B2B3B5B8 | ||||
Flash ROM | 8GB | ||||
RAM | 1GB DDR3 | ||||
Motherboard | |||||
Display @ | 4.5inch IPS 480*854 | ||||
touch screen | Multi-point touch capacitive screen | ||||
Form Factor | Bar type classical PDA,Industrial appearance | ||||
GPS | Supports GPS/QZSS/SBAS (WAAS/MSAS/EGNOS/GAGAN). Support Full AGPS | ||||
DGPS (please check options) | |||||
Bluetooth | v2.1+EDR / 3.0+HS / v4.0 Low Energy (LE) | ||||
WiFi | 2.4Ghz 802.11 b/g/n | ||||
External Interface | USB HOST/RS232(Customized) | ||||
Protection class | IP65 | ||||
Drop resistance level | 1.5m | ||||
Camera Function | Camera | 8MP Camera | |||
Video | Support still image and video capture | ||||
Sensor | G-sensor | YES | |||
Keypad | Front | 17 | |||
Side | 4 | ||||
Interface | Mini-USB connector | USB2.0 connection | |||
SIM card slot | *2 | ||||
TF card slot | Yes | ||||
power jack | Yes | ||||
Audio Jack | Yes | ||||
Battery | Type | rechargeable Li-ion battery 4500mAh | |||
Standby Time | 500hours | ||||
Calls Time | Up to 6hours | ||||
Charging Time | 4 hours | ||||
Physical Characteristics | Dimension | 175*76*27mm | |||
Weight | >400g with battery (according config) | ||||
OPTIONS | |||||
DGPS | ublox LEA-6T (with RTK) | ||||
MSR(Optional) | Compatible with one, two, three track(without PCI, EMV security certification) | ||||
PSAM(Optional) | ISO7816 (SIM card interfance) | ||||
IC card reader(Optional) | ISO7816 ID-1 | ||||
Fingerprint reader | option 1 | TCS1G | |||
option 2 | TCS1B | ||||
Printer | 2 inch Direct thermal line printing | ||||
Far Infrared Meter Reading (Optional) | IEC62056-21(IEC1107) communication protocol | ||||
433Mhz module | Require customers to provide 433Mhz wireless modules or specifications. | ||||
zigbee | Require customers to provide 433Mhz wireless modules or specifications. | ||||
RFID Reader | option 1 | LF RFID(134.2khz, ISO11784/11785, FDX-B/HDX) | |||
option 2 | LF RFID(125KHz) | ||||
option 3 | HF RFID(13.56MHz ISO 1443A/B ISO 15693) | ||||
option 4 | NFC(include 13.56MHz ISO 14443A/B ) | ||||
option 5 | UHF RFID 860-960MHZ ISO18000-6C (EPC Gen2) / ISO18000-6A,B compatibility in direct mode----with AS3992 shipset | ||||
option 6 | UHF RFID 860-960MHZ ISO18000-6C (EPC Gen2) ----with R2000 shipset, Long distance reader. | ||||
option 7 | UHF RFID 860-960MHZ ISO18000-6C (EPC Gen2) -with PR92000 shipset | ||||
Barcode scanner | option 1 | NEWLAND:EM1300(1D barcode reader) | |||
option 2 | NEWLAND:EM3000(1D/2D barcode reader) | ||||
option 3 | Symbol:SE955(1D laser barcode reader) | ||||
option 4 | HoneyWell:N4313 (1D laser barcode reader) | ||||
option 5 | Symbol: SE4500(1D&2D barcode reader) | ||||
Printer Module Specifications | |||||
Printing method | Direct thermal line printing | ||||
Paper width | 57mm | ||||
Print width | 48mm | ||||
Resolution Ration | 8 dots/mm (384 dots/line ) | ||||
Life of printing head | 5,000,000 -15,000,000 character lines | ||||
Printing speed | 40-60mm/sec | ||||
Character size | 8*16dots , 12*24dots | ||||
Paper supplied | 57mm wide , 22mmø | ||||
Interface | Serial RS232C/TTL | ||||
Operating temperature | 0℃--50℃ | ||||
Storage temperature | -20℃ -- 60℃ | ||||
Operating humidty | 10%--80% | ||||
Storage humidty | 10%--90% | ||||
Fingerprint Module Specifications | |||||
TYPE1 | TCS1G | ||||
Touchchip Sensor | Interface | 8 bit parallel interface 20-pin flex connector | |||
Power(typical) | 4.5-4.6V supply 20mA during capture | ||||
Touchchip Module | Interface Options | 5-soldier pads for USB only @ 5V 12-pin flex: USB,SPI,UART @ 3.3V (optional) | |||
Power(typical) | 3.0V-3.6V 80mA(capture,match) Standby(USB) :1350 uA Standby(UART/SPI) : 1150uA Wake-up time: <15 ms (Sleep to imaging) | ||||
Digital ID Hardware Engine | Biometric Companion Processor | - 1:1 match time ~50uS per template - 1:100 match time <2s typ. - On-board NVM storage for up to 100 templates - More than 100,000 erase/write cycles - More than 20 years data retention | |||
Common Spec | Fingerprint Image | 12.8×18.0mm(256×360pixels) 508dpi,8-bit greyscale | |||
Sensor Coating | gold coating,FIPS-201 Compliant (EIM) | ||||
Package Size | 23 mm x 35 mm x 4.1 mm | ||||
ESD | IEC 61000 - 4.2 level 4, +/- 15KV air, +/- 8IKV contact | ||||
Ingress Protection | IP 65 (water/dust protection) | ||||
Environmental | • Operating temp: -30 to +70 C • Storage temp: -30 to + 125 C • Humidity: 5% - 93% non-condensing • ROHS, low halogen | ||||
TYPE2 | TCS1B | ||||
Touchchip Sensor | Interface | 8 bit parallel interface 20-pin flex connector | |||
Power(typical) | 4.5-5.5 supply 20mA during capture | ||||
Touchchip Module | Interface Options | 5-soldier pads for USB only @ 5V 12-pin flex: USB,SPI,UART @ 3.3V (optional) | |||
Power(typical) | 3.0V-3.6V 80mA(capture,match) Standby(USB) :1350 uA Standby(UART/SPI) : 1150uA Wake-up time: <15 ms (Sleep to imaging) | ||||
Digital ID Hardware Engine | Biometric Companion Processor | - 1:1 match time ~50uS per template - 1:100 match time <2s typ. - On-board NVM storage for up to 100 templates - More than 100,000 erase/write cycles - More than 20 years data retention | |||
Common Spec | Fingerprint Image | 12.8×18.0mm(256×360pixels) 508dpi,8-bit greyscale | |||
Sensor Coating | SteelCoat(black coating) EIM-Lite | ||||
Package Size | 23 mm x 35 mm x 4.1 mm | ||||
ESD | IEC 61000 - 4.2 level 4, +/- 15KV air, +/- 8IKV contact | ||||
Ingress Protection | IP 65 (water/dust protection) | ||||
Environmental | • Operating temp: -30 to +70 C • Storage temp: -30 to + 125 C • Humidity: 5% - 93% non-condensing • ROHS, low halogen | ||||
Certificate | STQC |
Service
Company Information
Speedata mainly focus on the whole quality from procurement, research and development, production, sales as well as providing R&D by ISO9001 all the time.
We have focused on industrial PDA for 8 years, and we have our own factory in Beijing,Tianjin and quality inspection department.
We are headquartered in Beijing, with sales/R&D offices in Shanghai, Shenzhen, Dalian, and Tianjin city of China, and two manufacturing facilities, one in Beijing and one in Tianjin.
OEM service
1.As a hardware PDA producer, We also offer OEM/ODM design and manufacturing service for hardware required for Data collector terminal PDA, including
8 years' experience of R&D and OEM/ODM services for customers all over the world.
1. Price ranges | Factory direct with competitive and wholesale price with different demands |
2. Modules Options | Over 18 kinds of module functions are optional to meet your demands |
3. 3 Operation System | 3 Operation System for inference: Win Mobile/CE and Android |
4. Colors Options | 4 kinds of colors to choose: yellow, green, grey and blue. |
5. Customizations | Support OEM/ODM services with LOGO or Mainboard for our customers by Foxconn |
6. Wide Solutions | it supplies wide and various industrial solutions to make effective enterprises. |
2.As for software integration , We not only support 18 kinds of multiple modules but also supply 3 compatible operating systems. Those Including
More Modules and functions are developed as below:
1.1D/2D barcode scanner | 5.Thermal Printer | 9. 433M | 13.Bluetooth /WiFi |
2.Fingerprint reader | 6.IC reader | 10.ZigBee | 14.GPS/GPRS |
3.LF/HF/UHF RFID reader | 7.PSAM | 11.IR Meter reading | 15.2G /3G /4G |
4.NFC RFID reade | 8.MSR reader | 12.Temperature Reader | 16.Camera/Video |
Beijing Speedata Technology Co., Ltd
Founded in 2008, Beijing Speedata Technology Co., Ltd. is a domestic advanced IoT technology company with a deep technical background of intelligent terminals, and is focusing on productization of IoT technology. Driven by technology research and development, after several years’ hard working, Speedata has accumulated rich experience in fields of embedded, IoT technology and industrial design. Mainly producing Industrial Tablet, Handheld PDA, RFID Readers and customers are also able to design their own.