LCD Anticorrosive Coating Holiday Test Equipment High Voltage

AC&DC Intelligent Frequency Conversion Anticorrosive Coating High Voltage Holiday Test Equipment

Two model: 0.5KV-7KV (HD-109A) 6KV-35KV (HD-109B)

Spark detector, also known as spark leak detector, spark leak detector, etc. The instrument is mainly used to detect whether there are pinholes, trachoma and other defects on the thick non-conductive matrix of metal substrate. The instrument is very simple to use, one end grounding, the other end is the probe, (probe form many carbon brush type, circle spring type, flat rubber type), the instrument through the high voltage probe out of DC high voltage, when the probe through the defect of the coating surface, the instrument will automatically sound and light alarm.

Check the instrument before use, the instrument brush must not touch the human body, so as not to cause injury.

Main applications for spark detector

1,Oil and gas anticorrosive production factory, pipeline production company, construction departments and qualitative inspect branch.
2,Using for gas or oil company and water company pipeline inspecting
3,Using for factory of ship-building, petrochemical plant, machinery plant, enamel factory and bridge engineering anticorrosion-layer inspecting.
4,Widely used for pipeline transportation company anticorrosion-layer inspecting

General information:

HUATEC HD-109A/B series intelligent frequency conversion electric spark pinhole detector uses intelligent frequency conversion high voltage detection technology, used to detect pinholes, cracks and other damage and defects in non-conductive coating on conductive substrate (such as metal), can be used to detect the quality of insulating and anticorrosive coating on the surface of storage tanks, valves and pipelines. Host for portable, rugged ABS shell, the instrument appearance design is advanced, stable and reliable performance, can be widely used in anticorrosive engineering, plastic airtight joint detection, concrete coating layer air tightness test, petrochemical pipeline corrosion inspection, enamel production industries, is used to detect an essential tool for metal surface insulating anticorrosive coating quality.

Main Features:

1.The special metal hose protects the connecting cable between the main engine and the high voltage generator;

2.Military-grade gold-plated connector to ensure the reliability of the connection;

3.Unique design, ABS case, beautiful, durable;

4.Light touch waterproof film keyboard, easy to operate;

5.AC/DC power supply can be switched quickly and automatically, AC/DC dual-use;

6.Large capacity lithium ion battery pack, energy saving and environmental protection;

7.Independent high pressure button, maximum protection of detection personnel safety, in line with international safety standards;

8.Intelligent frequency conversion high voltage detection technology is suitable for humid environment, the detection process does not generate static electricity;

9.Can be detected by dew wet or muddy and slightly conductive surface;

10.Can automatically identify different working probe (high pressure gun), self-calibration;

11.Digital display battery voltage and output high voltage;

12.When pinhole and other defects are detected, acousto-optic alarm;

13.The output high voltage can be accurately adjusted, and the display precision is high.

14. With overload protection function;

Technical parameters:

Detection voltage: 0.5KV-7KV (HD-109A) 6KV-35KV (HD-109B)

Coating thickness: 0.03mm -- 1.7mm (HD-109A) 1.4mm -- 11.3mm (HD-109B)

Resolution: ±100V

Operating temperature: -20℃ ~ +50℃

Working humidity: avoid condensation of dew on the surface (see DIN55670)

Alarm signal: 86 decibels. Frequency 1500HZ. 1 second for each pinhole alarm

Voltage display: LCD display, 3 digits

Power supply: 12V lithium battery pack (light weight, energy saving and environmental protection)

Working time: HD-109A (16 hours), HD-109B (12 hours)

Power supply mode: alternating direct dual use

Charger: 110V to 230V 50/60Hz automatic conversion

Main engine weight: 1.2 kg

Host size: 280mm×265mm×86mm

Detection principle:

Spark detector is based on a variety of conductive insulating coating on substrate surface to add a certain amount of pulse pressure, such as anti-corrosion layer, thin metal or pinhole of leak leakage, when pulse high voltage, air gap will be punctured and produce spark discharge, at the same time send pulse signal to alarm circuit, the alarm sound and light alarm, so as to achieve the aim of the anticorrosive layer of quality testing.

Notice for operation:

1. Before use, the operator should read the instrument instruction carefully, strictly follow the operation specifications, pay attention to the protection of the instrument, prevent fall, collision and high temperature, do not place near the humidity and corrosive gas.

2. Select a proper ground point to ensure test quality.

(1) small volume of metal surface anti-corrosion layer detection, to be detected by the object with insulation support more than 20cm, and then the grounding wire is well connected to the metal object detection.

(2) For the detection of large volume or flat objects, when the measured object has good contact with the earth, only the grounding wire access to the earth can be tested.

3. During testing, testing personnel should wear high-voltage insulating gloves, and no one should touch the probe and the object under test, in case of electric shock!!

4. The surface of the tested anticorrosion layer should be kept dry. If there is conductive layer (dust) or water, it is not easy to determine the exact location of the leak point.

5. Power switch must be turned off when the instrument is not in use!!

6. When the undervoltage indicator lights up, please be sure to charge in time!!

Stable output voltage of high voltage gun!!

Standard delivery:

Main unit, high voltage generator, 2 meters probe wire, grounding wire, probe brush, battery, charger, strap, instrument case, HUATEC calibration certificate,operation manual

Optional accessories:

Established in year 2000,HUATEC Group is a reliable manufacturer and supplier of testing instruments in Beijing China. HUATEC Group combines all the R/D and production advantage of all its own subsidiaries, takes advantage of its years marketing and sales experience in global market, contributes to offering most qualified competitive products and service to international markets.

HUATEC Group products are composed of all kinds of metal and non-metal testing equipments, such as portable hardness tester, micro hardness tester, shore durometer, vickers hardness tester, Rockwell hardness tester, Brinell hardness tester, portable X-ray flaw detector, mobile X-ray flaw detector, Real-time X-ray image flaw system, holiday detector, digital portable eddy current electrical conductivity meter, digital ultrasonic flaw detector, coating/painting thickness gauge, ultrasonic thickness gauge, vibration tester, surface roughness tester, profile projector, etc, and all of their accessories such as ultrasonic transducer, test block, IQI, lead screen, densimeter, film viewer etc.

HUATEC Group employees include a highly trained staff of engineers for sales and service, that are committed to offer satisfactory products and prompt service to all home and abroad customers.

HUATEC Group, based on most advanced technology in China, is an China famous industry group, focus on development & research and precision production of various testing equipment. The group has two own factories and two sister factories located in area of Beijing, Liaoning, Shandong and Guangzhou. All the products are produced following ISO9001 regulations and the products have been exported to most of world markets in passed years.

Our promise: Reliable quality, competitive price, fast delivery, satisfactory service.