Speed Limiter In Kenya With GPS Tracking Device Three In One Auto Track

. Product Function:

1. Fixed maximum speed limiting: Set a maximum speed according to the actual needs of vehicles. For example: if you require the vehicle speed does not exceed 60Km/h (or other appointed speed), the product will strictly control the vehicle speed does not exceed 60 Km/h (or other appointed speed) ;
2. GPS speed data collection data collection ;
3. Vehicle pulse speed ;
4. Digital display controller adjustment.

Electronic Throttle Vehicle Speed Limiter
CA100A-2GF
Installation Method
Product Brief:
Vehicle speed limiter CA100A-2GF is a intelligent terminal equipment which can
realize precise speed limiting for vehicles. It combines the Internet, the platform
server, the vehicle terminal system perfectly, to reduce the accident rate bythe
flexible speed limit mode, and provides a good vehicle management for users. It is
not only a speed limiter but also a GPS Tracker.
The product adopts ARM intelligent chip, speed control precision is very
high , and the performance is reliable. It will not affect the big throttle start nor
the power torque, stable and reliable; Only limit the maximum speed, the vehicle
will not stall during speed limiting, and ensure the throttle pedal free movement
in the right speed range.
CA100A-2G reserves a wealth of interface, can work together with a variety of
externalequipment, with high compatibilityand performance.
1
Preface :
If you want to achieve fast installation, you need to find a installer very familiar with
this vehicle type, because the circuit wiring has huge difference fordifferent vehicles.
For example, now you want to install limiter for bus, you can not find a maintainer
forprivate car, you must finda professionalmaintainerforbus. In ourpastexperience,
only a veryprofessional installer can find the lines fast and installthe limiterfast.
Please note this point is very important!
In addition, we also recommend that the installer read this instruction carefully
before installation, if he can not understand the instruction very well, please
communicate with us, it can improve the installation efficiency effectively .
Product Accessory:
1)Power harness 2)limiting harness 3)Extension harness 4)GPS Antenna
5) GSM Antenna 6)SIM Card Slot 7)Digital Display Controller(optional)
8)Speaker(optional)

2. Technical Parameters:

Speed Limiter In Kenya With GPS Tracking Device Three In One Auto Track

1. The Lines Definition:
2. Electronic Mechanical Throttle Vehicle Truck Over Speed Limiter In Kenya

4 At first, we adjust the voltage value of the brown wire to the low value we measured form the accelerator pedal signal wire. ( The value of the actual measured voltage prevail. ) Then we adjust the voltage value of the white wire to the high value we get form the accelerator pedal signal wire. ( The value of the actual measured voltage prevail. )

Then , we can dot a little red glue onto the adjustable knobs to fix it, in order to prevent the adjustable knobs may appear small rotation in the long vehicle driving.

①　Then , we connect the yellow, brown, green ,white wires to the original signal wire of the vehicle.

At first, we cut off the low voltage accelerator pedal signal wire. Connect the wire end which is close to the accelerator pedal to the yellow wire of the speed limiter . Connect the rest wire end to the brown wire of the speed limiter. Now it is turn to the other high voltage accelerator pedal signal wire, we also cut it off, Connect the wire end which is close to the accelerator pedal to the green wire of the speed limiter. Connect the rest wire end to the white wire of the speed limiter.

②　We place the speed limiter into the steering room.

③　Find the ACC wire of the vehicle ( it is in the key head, power on when open the key , power off without the key. ) We connect the ACC wire ( green line with black strips ) of the limiter host to the vehicle ACC wire.

④　Find the signal wire of Left-turn indicator and right-turn indicator. Connect the blue wire of the limiter to the signal wire of Left-turn indicator. Connect the orange wire of the limiter to the signal wire of right-turn indicator.

⑤　If the vehicle has it own speed sensor , we find the signal wire of this original vehicle speed sensor ( normally it is behind the the mile-meter), and connect the gray wire of the limiter to this vehicle original speed signal wire.

If the vehicle dose not have its own speed sensor, we add a speed sensor for it, and connect the gray wire of the limiter to the speed signal wire of this speed sensor. Please note that most of the vehicles have the original speed sensor, only a few old vehicles do not have it.

⑥　Connect the red wire with fuse of the speed limiter to the vehicle long power supply in the steering room.

⑦　Connect the black wire with fuse of the speed limiter to any steel part of the vehicle( Ground Treatment).

⑧　Now all the wires have been connected well , Please check all the circuits and fix well.

⑨　Recover all parts , close the dash board , Done!

5 Connection Diagram for Mechanical throttle

Speed Limiter In Kenya With GPS Tracking Device Three In One Auto Track

The Specific install Steps:

①　Place the limiter host.

The limiter host can be installed in steering room ,a place will not not affect the driver operating. Please pay attention to fix it well, make the lines routing as hidden as possible.

②　Install the limiter actuator and connect its drawing cable to vehicle throttle cable.

At first, we connect the actuator power line well, turn on the power, the actuator will spit its steel cable automatically , turn off the power until the cable completely spit out.

Then please step the accelerator pedal to the end state. Make the pull head of the actuator cable pass through the engine throttle control lever. Then cut off the excess portion, fixed the cable head well, make the drawing direction of the limiter steel cable and vehicle throttle cable negative, then fix the limiter well, there is a mounting bracket on the limiter body. Please install it in a appropriate position onto the vehicle with screws.

Mechanical actuator is used to control the throttle valve opening, when the vehicle speed in the normal range, the mechanical actuator will be in standby state, will not interfere the driver’s throttle operating. When the vehicle is in over speed state, the actuator will begin working, it will make the throttle valve mouth get smaller compulsively. The driver should not vigorously stamping step on the throttle. We shall not be responsible for the damage caused by this deed.

Note: You should choose the actuator model according to the working voltage of vehicle battery. So please tell us the vehicle voltage at first.

③　Connect the control wire of the limiter actuator to the limiter host, and connect the power line and ground line for the limiter actuator.

④　Connect the power line,ground line, ACC line, left-turning signal line, right-turning signal line, vehicle speed sensor signal line to the original vehicle lines one by one.

Speed Limiter In Kenya With The Function GPS GPRS Speed Limit Three In One

3) The Installation Test Method:

①　Start the vehicle normally, stepped on the accelerator pedal, to check if the refueling is in normal state.If OK ,it means installation well,otherwise failure.

②　In the refueling process, slide the switch (which is on the PCBA board) to the “close” end, then step on the accelerator pedal, if fueling is failure, it means the installation is successful, otherwise failure.

③　Wait about 3-4 seconds, then slide the switch (which is on the PCBA board) to the “broke” end, then step on the accelerator pedal, if you find refueling is in normal state, it means the installation is successful, otherwise failure.

Note: the above test process should not appear the phenomenon of stalling or automatic fueling. If appears, it means some problems exist.

if the test situation are the same with the above description, we preliminary estimate the connection and the adjusted idle voltage is right. To ensure the 100% right installation, we suggest that the driver take actual road driving test.

1. We provide web tracking system, Android APP and IOS App free
2. Our device can send data to your own server, we will provide SDK and API for integrate (sample source code:C/C++,Java,C#)
3. we will install the tracking system into your server if you have the own server
4. We provide OEM and ODM services, it is free if you only add logo and company name
5. Warranty: 24-month

Speed Limiter In Kenya With GPS Tracking Device Three In One Auto Track