
GC6891N Gas Chromatography
Name | Model | Configuration | Qty |
Gas Chromatography | GC6891N | 1. Detector: FID,TCD 2. Capillary and packed column injection system 3. 7 steps program heating 4. Smart backdoor 5. Chromatography workstation 6. EPC control 7. 6-way valve and 10-way valve | 1 |
Hydrogen-air generator | 1 | ||
Liquid automatic sampler, 16 positions | 1 |
Gas Chromatography
GC6891N
GC6891N is a new generation of high-end laboratory GC,which is produced according to the international standards. Based on the most advanced international technical area and application experience, its features, reliability and sensitive application are in the world high level.
4.1 Injector flow, column carrier flow, detector gas flow are controlled by EPC.
4.1.1 Micro-channel gas integrated board
4.1.2 Imported micro-ratio and flow/pressure sensor
4.1.3 Temperature self-compensation to ensure the accurate flow, its pressure controlling can precise to 0.01Psi.
4.2 Industry-leading detector design.
4.2.1 All the detectors with high-precision electronic flow/pressure control.
4.2.2 It can be matched with packed column and capillary column.
4.2.3 The amplified board after special ceramics treatment can keep stable in wet season.
4.4 Accurate tracking design for furnace temperature.
4.5 Accurate programmed heating control for the furnace temperature.
4.5.1 Inner temperature controlling precision: <0.01
4.5.2 Temperature between inner points: ≤1℃
4.5.3 Quick heating and cooling, the max programmed heating speed: 120℃/min, balance time: 10 sec, cooling time: 300℃-50℃ for 6 minutes.
4.5.4 The temperature precision is absolutely controlled(compared with the real temperature, the difference is less than 0.3℃).
4.6 The achievement of gas circuit cutting technology
4.6.1 Complex samples separation can be analyzed by multidimensional chromatography.
4.6.2 It saves the analysis time and period by blowback function of the chromatograph column.
4.7 Chromatographic columns can be heated individually, and the using temperature can be set according to the different columns, so that make every column separately.
4.8 GC6891N adopts the advanced power distribution management shunt. One 3000-watt UPS can provide stable working power for 10 sets of GC with the normal power of 2250w/set.
4.9 GC6891N adopts the imported valve configuration system, which can carry 8 valves (4-way valve, 6-way valve, 10-way valve or liquid sampling valve) to automatically control and operate by sequence.
4.10 GC6891N uses 8-digit auto-injectors (you can choose Agilent 7683/7693 liquid auto-injector).
Column oven | |
Furnace dimensions | 28 x 30 x 18cm |
Temperature controlling rang | Higher than the room temperature of 5℃-450℃, liquid nitrogen cold trap: -80℃-400℃,dry ice cold trap:-55℃ to 400℃ |
Temperature setting precision | 0.1℃ |
Max programmed heating speed | 120℃/min |
The longest method run time | 999.99 min |
The highest step of program | 7 steps |
Programmed heating rate | 0.1-120℃/min(increment of 0.1℃) |
Column loss can be compensated (dual channel column) | |
Heating area | |
Six individual controlling heating areas (do not content furnace temperature control, two injectors, two detectors and two auxiliary heating areas ). | |
The maximum using temperature in auxiliary heating areas | 300℃ |
Detectors | |
FID | |
Maximum using temperature | 450℃ |
Minimum LOD: | ≤2.5pgC/s[n-C16] |
Linear dynamic range | 107(±10%) |
Data collection frequency | Max 100 Hz |
Adapted to packed columns and capillary columns | |
TCD | |
Maximum using temperature | 400℃ |
Minimum LOD | <400 pgC3H8/ml(He) |
Linear dynamic range | 105(±5%) |
Data collection frequency | Max 100 Hz |
The design of monofilament TCD and micro-ECD, adapted to packed columns and capillary columns |
GC6891N is widely used for the analysis of oil extraction and refining, petrochemical, fine chemical, food safety, environmental protection, electronic high-purity gas industry, scientific research institutes, QC, safety supervision, public security forensic and national security and so on.
Beijing Topsky Century Holding Co.,Ltd
Beijing Topsky Century Holding Co., Ltd.was established in 2003, determined to become a respected global safety equipment
R & D enterprise.The Headquarter is in Zhongguancun Hightech Park, Jinqiao industrial base, Located total 3,000 square meters.
The registered capital is 42 million RMB. We have three subsidiaries: TOPSKY,TBD,KYCJ etc, is a national high-tech enterprises.
our product range:
1.Fire equipment,including fire robot,water mist system;
2.Fire rescue tools, including hydraulic tools,patrol powered concrete saws and so on;
3.Life search equpment, including audio & video life detector ,fire infrared imager and so on;
4.Gas detector,such as one gas detector, two gases detector, multi gas detector;
In fire equipment,rescue tools ,life research and police&millitary equipment, our company has unique advantage.
In safety supervision and law enforcement equipment,we are one of the largest producer.
Currently, our product was already exported to more than 20 countries and regions such as America, France, Australia, Italy and so on.
Until now, our company has
17 National Fire Equipment Quality Supervision and Inspection Center Certificate
103 mine safety certification mark (MA)
9 Chemical Explosion-Proof
6 CE certification
45 patent certificates
Topsky keeps launching new products at a proud speed 30% increments every year. Our company regards offering reasonable price,
fast delivery and good aftersales service as our mission . We sincerely hope to cooperate with more and more customers from
all of the world based on equality and mutual benefit.