24V DC Servo Motor Boom Parking Intelligent Barrier , 10 Million Operation Times

Up/Down Speed Parameter Adjustments Instruction:

Parameter Name Explanation:

D00spa name

PA__00 parameter item

PA__AST: reset

** _ Err: false alarm

Key Description:

Menu: menu key, switch in four parameters

L / R Arrow: Left and right movement keys, moves circularly, the corresponding characters flash

UP arrow: increase from 0 to 9, cycle key, add one for each pressing

ENTER: Enter key. Press ENTER at the currently displayed parameter to enter the specific parameter setting.

Parameter Explanation:

1d0000, 2d0000, 3d0000, 4d0000: Indicates that the current parameter is 0000, which can correspondingly

revise from the first to the fourth bit on the rightmost side.

Halfway return time parameters: PA__09 (range from 100 ~ 1500)

Up parameters: PA__10, PA__11 (range from 100 ~ 9999), PA__12 (range from 01 ~ 99),

Down parameters: PA__13, PA__14 (range from 100 ~ 9999), PA__15 (range from 01 ~ 99),

Down position parameters: PA__20 (range from 01 ~ 9999)

Up position parameter: PA__21 (range from 01 to 9999)

Resistance sensitivity: PA__23 (range from 10 to 99)

Boom level: PA__30 (range from 0 to 1)

1. NO/NC mode selection, in the dip switch 1, ON for NC, OFF for NO.

2. Self-locking when power off or gate automatically open selection. In dip switch 2, ON is for automatic opening

when power off;

3. Automatic reverse or stop selection when meets external obstacle. In dip switch 3, ON is for automatic

stop and OFF is for automatic reversing;

4. Auto closing speed adjustment selection, in the dip 4, 0.9s and 1.3s for option. ON is for 0.3s.

5. Delay automatic closed selection. Dip switch5,6,7,8 are for it and the delaying time is 1s,2s,3s,4s,5s,

8s,10s,15s,20s,25s,30s,35s,40s,50s,60s for option.

6. The boom angle adjustment, suitable for some areas that the boom can’t reach the vertical position

caused by obstacle. Adjustable for 60°, 70°, 80° and 90°. And the dip switch is another independent one (1 2 switch).

7. Maintenance mode switch, convenient for possible repairing and adjusting.

8. RS485 interface, can connect with computer, check the barrier gate state and alarm information.

9. Parking lot open/close control signal and remote control open/close signal are separate. Arm opening

have memory function, Number of pulse arm opening, and closed after number of cars (must be equipped with a vehicle detector)

10. Emergent stop input signal function.

11. Arm swing out signal input function.

12. Alarm information output function.

13. Barrier gate OK signal output function.

14. All input ports are optoelectronic isolation, the input voltage range is DC5 ~ 24V

15. Vehicle detector signal input and infrared signal input, that is, use the output COM, NC of the loop detector

(normally the No.4 and No.11, specially related with detector, the barrier gate not respond to closing command

when the coil is not connected).The infrared detector uses the NPN type.