
GSM 850Mhz Cell Phone Signal Boosters / Marine Signal Booster High Power
Cell Phone Signal Booster Descrption:
GREETWIN cellular signal booster boosting your cellular signal anywhere.
Signal booster kits are offered with various connector types. All kits come with cables and antennas which match the booster connector type. If you need to purchase extra extension cables or antennas please be sure to match the booster connector type.
The Marine Signal Booster Kit is the best kit for boosting cell
signal in your boat or marine craft.
Eliminate dropped calls and increase data speeds with a signal
booster.
Indoor Cell Phone Signal Booster series is an ideal solution for
wireless system in small/medium businesses and home users looking
to enhance indoor wireless connectivity. It is connected via
coaxial cable to Donor Antenna and Service Antenna, Donor Antenna
is placed outside the building where it has easy access to BTS
signal, and the Service Antenna is placed in the building where it
can extend radio coverage to the blind area. And Automatic Gain
Control (AGC) to avoid the Booster from over saturation, therefore
maintaining a high voice quality and avoid adding interference to
network. With good looking & super compact design also make it
attractive. Besides, it is easy installation feature is also for
individual customers to install the booster by themselves, and it
does not need much professional knowledge and instrument.
The repeater improves mobile signals with no negative impact on
human health.
Cell Phone Signal Booster Specification:
Frequency Range | Uplink | Downlink | |||
GSM850 | 824 - 849MHz | 869 - 894MHz | |||
Max. Gain | 70dB | 75dB | |||
Max. Output Power | 23dBm | 20dBm | |||
Band width | Wide Band | ||||
Manual Gain Control | 31dB / 1dB Step | ||||
Automatic Gain Control | >30dB | ||||
Ripple in Band | CDMA,GSM≤6dB; DCS,PCS≤8dB; | ||||
Noise Figure | ≤ 6dB | ||||
VSWR | ≤ 2.0 | ||||
Intermodulation Products | 9KHz~1GHz | ≤ -36dBm | |||
1~12.75GHz | ≤ -30dBm | ||||
Spurious Emission | 9KHz~1GHz | ≤ -36dBm | |||
1~12.75GHz | ≤ -30dBm | ||||
Time Delay | ≤ 1.5 μs | ||||
Frequency stability | ≤ 0.01ppm | ||||
MTBF | > 50000 hours | ||||
Impedance | 50 ohm | ||||
Power Supply | AC 90-264V,DC 9V/3A | ||||
Power LED | Power indicator | ||||
ISO(Alarm LED) | Red | Self oscillation or Strong input signal | |||
Green | Normal | ||||
Mechanical Specification | |||||
RF Connector | N-Female | ||||
Switch | Power Switch | ||||
Cooling | Heatsink Convection cooling | ||||
Humidity | < 90% | ||||
Operating Temperature | -20°C ~ +55°C | ||||
Environment Conditions | IP40 | ||||
Installation Type | Wall Installation | ||||
Size | 204mm×128mm×27mm | ||||
Weight | < 1.5Kg |
Cell Phone Signal Booster Features:
1. Cost effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption,
3. easy installation, great cover.
4. Expansion and extending of the signal of base station.
5. Optimization of the quality of the signal and source
6. improve mobile signals for much better phone call quality and smoother data transmission.
7. High linear design, ALC function design, low interference to BTS.
8. Support any cellular devices (voice & data & video)
9. Wide band signal booster, or customize selective band booster.
10.This booster also has an automatic Level control (ALC) feature that
will reduce the output power of the booster if oscillation is
detected.
Support these systems:
Frequency Range | Uplink | Downlink |
CDMA 450 | 452.5 - 457.5MHz | 462.5 - 467.5MHz |
LTE700 A/B | 699- 716MHz | 729- 746MHz |
LTE700 C | 777- 787MHz | 746- 756MHz |
LTE700 D | 788- 798MHz | 758- 768MHz |
LTE 800 | 832- 862MHz | 791- 821MHz |
iDEN | 806- 824MHz | 851- 869MHz |
CDMA 800/GSM 850 | 824- 849MHz | 869- 894MHz |
GSM 900 | 890- 915MHz | 935- 960MHz |
EGSM | 880 - 915MHz | 925 - 960MHz |
AWS1700 | 1710- 1755MHz | 2110- 2155MHz |
DCS 1800 | 1710- 1785MHz | 1805- 1880MHz |
PCS 1900 | 1850- 1910MHz | 1930- 1990MHz |
WCDMA/3G 2100 | 1920- 1980MHz | 2110- 2170MHz |
LTE 2600 | 2500- 2570MHz | 2620- 2690MHz |
Cell Phone Signal Booster Advantages:
1. can customize the Cover Image on the Cell Phone Signal Booster, design private styles
2. If there are strong input signal or severe self oscillation, ISO
LED is red.
3. If there are good input signal, AGC LED is green.
Standard Package:
1) AC90-264V, DC9V/3A power supply adapter 1PCS
2) AC power cord (EU/US/UK/SA/China standard, etc) 1PCS
3) Installation kit 1PCS
4) User manual 1PCS
Cell Phone Signal Booster Application:
To expand signal coverage or fill signal blind area where signal is
weak or unavailable.
Indoor: Marine, houseboat,
Cell Phone Signal Booster Installation:
Installing the Marine Signal Booster Kit is very easy.
To start, mounting the Marine Omnidirectional antenna, as high up as possible on the boat or marine . Run the attached cable into the boat and connect the cable to the signal amplifier's Outside Antenna port. To the Inside Antenna port, connect the inside antenna cable and run to the inside panel antenna, which you'll mount either on the ceiling or the wall in the location where you'll be using your mobile devices . Turn on the repeater and you should immediately start receiving boosted signal.
Application Diagram:
Shenzhen Greetwin Technology Co.,Limited
Shenzhen Greetwin Technology Co., Limited is one of the leading suppliers which specializes in designing and
manufacturing RF Jamming Equipment and Wireless Coverage Products.
Wireless Coverage Products include 2G 3G 4G LTE 5G RF
Repeater.
The RF Repeater solutions will bring smooth and clear
calls, support all bandwidths and mobile standards including TETRA,
iDEN, LTE700, GSM850, EGSM, GSM900, DCS1800, PCS1900, CDMA800,
CDMA450, LTE 4G, CDMA2000, 3G(WCDMA), LTE2600 and TDD-LTE series.
Such as, Wide band Repeater, Band selective Repeater, Digital Repeater, High Power Outdoor Repeater, Fiber Optic Repeater, ICS Repeater, Consumer Signal Booster, Power Amplifier.
We are committed to providing the best solutions for mobile operators, offering OEM and ODM service. Products can be customized according to different operators in the world and the output power are available from 0.01W to 20W.
RF Jamming Equipment include Cell Phone Signal Jammer,
RF Communication Jammer(20-6000MHz) and 20-200W Power amplifier.
GREETWIN is the foremost innovator in the field of RF
jamming, offering a comprehensive range of jamming equipment and
systems which have a proven record of reliability and performance
in all types of applications and environmental conditions.
In countering the ever-growing threat of remotely
controlled improvised explosive devices (RCIEDs), we has invested
heavily in the development of a range of multi-band,
very-high-power jamming systems for the protection of troop
transportation, military and police checkpoints, large governmental
establishments, bomb disposal squads and VIP convoys.
Such as, 5KM Drone jammer, UAV jammer, High power bomb
jamming devices, Military IED jammers, Digital programable jammer,
VIP Convoy Bomb Jammers (RCIED Jammers), Mobile Phone Signal
Jammers, Prison Jammers, Portable Jammers, Handheld Jammers, to
suit all types counter terrorism activities.
Our clients are government agencies, military, SWAT
team, prison, school, bank, law enforcement and VVIPs. We also
serve corporations and private individuals who must take
responsibility for protecting assets, proprietary information,
executives and family members.
GREETWIN products have been exported to more than 60
countries and regions around the world. Such as Southeast Asia,
Africa, Europe, South America and the Middle East.
Let us hand in hand and create a glorious cause!