
Introduce of sliding turnstile gates :
Intelligent Sliding door through years of careful development, research and production of intelligent channel management equipment, mainly for personnel access to the intelligent management of high-tech products.The equipment organically integrated mechanical, electronic, microprocessor control, and a variety of identity recognition technology. Optional various identification system devices and reliable security protection devices, alarm device, direction, and extended a friendly LED count display interface, to coordinate channel intelligent control and management.Intelligent swing gate easily compatible IC cards, ID cards, bar code cards, fingerprint reader.To realize access personnel civilized and orderly passage way, the effective management of personnel access. Can be widely used in stations, docks, subways, factories, buildings, intelligent community, hotels, clubs, corporate.
1 | integration system | RFID system , face recognition system , ESD system |
2 | Frame material | 304 stainless steel |
3 | Frame Size | 1400*300*1030mm |
4 | Drive | Stepping motor or serve motor |
5 | Rotation direction | bi-directional and unidirectional |
6 | Controller | dapts micro-computer controller can be 7 programmed according to customer needs |
7 | Interface: | standard input and output interfaces can be used for other integration systems |
8 | Signal source | dry contact and high-low level signals |
9 | Working voltage | 220V AC ±10% |
10 | Voltage: | 220V AC ±10%, 24V DC at 3A ±10% and 12VDC at 3A ±10% |
11 | Indoor/outdoor temperatures | -10to 70°C |
12 | humidity range | 95% |
13 | Switching time | 1s |
14 | Traffic speed | 30~35 persons/minute |
15 | Fault status | power-off and giving free exit/entry path |
16 | Movement failure rate | More than 5millions |
17 | Waterproof | Yes |
18 | Card reader area | 2 |
Functions and Features of the sliding gates :
1. Problem-self-checking function.
2. Many options of working ways: bi-direction card reading; one direction card reading and another no reading; one direction card reading and another freely. And single direction photocell controlled passing and close. Working ways can be set in the control panel.
3. When power off, arm open automatically and power on again, arm will be held automatically.
4. When valid card read and passenger passed, arm can be delayed to close from 1-60s which can be set in the control panel.
5. Auto-reposition function: After card read, passenger not pass within regulated time period, full-height turnstile will cancel this passing right. And the regulated time period for passing can be set by managers.
6. If passenger pass without card read or valid card read, flap barrier will alarm untill passenger get back from the flap barrier and then take a valid card to be read for passing.
7. Flap barrier is with 485 interface for long-distrance control concern.
8. Anti-rush function: if there is no open single, arm will be holding tightly.
9. Double anti-clipping function: photocell anti-clipping and mechanical anti-clipping.When passenger is going through the flap barrier, photocell will detect out this situation and will not close. After passenger passed, arm will close automatically. During its reposition, if arm meets any obstacle, arm will get back automatcially or stop working for a while with very slight force. Also it will alarm.
10. Flap barrier is with standard electrical interface for the integration of various readers and writers.
11. Flap barrier can count how many passenger has passed and will show it in the LED display.
12. Direction display to guide passenger which direction is to go.
13. Card-reading with memory or without memory function.
14. Flap barrier can control the population inside in the control of software.
15. Stable running with little noise.
Shenzhen Rona Intelligent Technology Co., Ltd
Established in 2004, Shenzhen RONA Intelligent Technology Co., Ltd (hereinafter referred as to RONA) is a leading Chinese manufacturer of security turnstiles and intelligentized access control system.
With more than 15 years professional production facilities and advanced engineering innovations, RONA designs, manufactures and successfully markets products that meet international standards of the security industry. Products by RONA work at many hundreds of locations in 60 countries worldwide.
we have manufactured a full-line of security turnstiles at our ISO 9001:2008 certified facility in Shenzhen China. Our customers are stadiums, health clubs, factories, schools, governments, embassies, office buildings, amusement parks, arenas and any other site that requires the control of pedestrian access.
RONA started and continues as a professional turnstile company with one goal – to deliver a broad range of innovation, high-quality products and services that meet our customers needs for security and effective business management.
-> Luxury Speed Gate
-> Tripod Turnstile
-> Swing Gate Turnstile
-> Flap Turnstile
-> Sliding Gate Turnstile
-> Drop Arm Turnstile
-> Non-obstacle Optical Turnstile
-> Waist Height Turnstile
-> Full Height Turnstile
-> Access Control System
-> Ticket Management System
-> Visitor Management System
-> 15 years expertise in the security turnstile market
-> Sales in 60 countries worldwide
-> Over 7000 sq. m of production & office space
-> An over 100-strong team of qualified professionals
-> A sales network of over 7 cities in China
-> Client Services, Technical Support, Marketing and Advertising, Research and Development Departments located in Shenzhen, China
-> A modern manufacturing plant in China
-> Finished-goods warehouses in Shenzhen
-> RONA quality management system is compliant with the CE &ISO 9001 international standard
RONA Industrial Park